AERCO SmartPlate - Manual (Page 26)

SmartPlate Installation, Operation & Maintenance Manual
CHAPTER 4 – ADJUSTMENT
Page 26 of 138 AERCO International, Inc.  100 Oritani Dr.  Blauvelt, NY 10913 OMM-0069_0E
PRI: 11/26/2013 Phone: 800-526-0288 SP-100
COVER
SCREWS (2)
HAND-WHEEL
Figure 4-1. Control Valve Electronics Module – Top View
2. Remove the Electronics Module cover from the Valve to access the internal components
shown in Figure 4-2
1 2 3
ON
LED
AUTO-
STROKE
BUTTON
DIP SWITCHES
HAND-WHEEL
Figure 4-2. Control Valve with Electronics Module Cover Removed
NOTE
When external 120/240 VAC power is properly connected to the
ECS/SP Control Box, 24 VAC power is supplied to the MXG-461
Control Valve when the Control Box POWER switch is set to the
ON position. The POWER switch is located on the right side of the
Control Box.
3. Ensure that all three (3) DIP switches shown in Figure 4-2 are in the OFF (Down) position
as shown.