Replacing memory components, Removing the chassis cover, Required tools – Cisco XM Universal Gateways Cisco AS5400XM User Manual
Page 55: Safety recommendations, A p p e n d i x, Appendix a, “replacing memory components
A-1
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
A P P E N D I X
A
Replacing Memory Components
This appendix contains procedures on how to replace memory chips in the Cisco AS5400XM universal
gateway. The appendix contains the following sections:
•
Removing the Chassis Cover, page A-1
•
Replacing the Compact Flash, page A-5
•
•
Replacing the Chassis Cover, page A-9
Removing the Chassis Cover
This section describes how to open the chassis by removing the chassis cover.
Required Tools
You need the following tools:
•
Medium Phillips screwdriver
•
Small or medium flat-blade screwdriver
Safety Recommendations
Note the following safety recommendations:
Warning
Before opening the unit, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001