Initial setup, Positioning xsboxr4v, Inserting sim card – 4G Systems XSBox R4v User Manual
Page 15
XS
BoxR4v
15
Initial setup
It is possible to operate the XSBoxR4v with a PC/laptop and/or an analogue telephone.
Setup the XSBoxR4v in an appropriate place, which fulfils the following criteria:
■
The place must be dry and free of dirt with no exposure to direct sunlight.
■
Should you wish to connect the device to your computer using a network cable, then please note the maximum
cable length is 100m and choose a place close to your computer.
■
Place the device in central place in the office or at home with good HSDPA/UMTS/EDGE/GPRS coverage, should
you wish to connect one or more computers using wireless WLAN connections to the XSBoxR4v.
■
Ensure there is enough distance to potential interference sources such as microwaves or electrical devices with
a large metal housing.
■
You can use the drill template supplied to wall mount the XSBoxR4v (see also “Drilling measurements” on
Positioning XSBoxR4v
Position the XSBoxR4v as close to the window as possible.
Reception is best there.
Inserting SIM card
Push the SIM card completely into the slot on the device
base until it locks.