Lan connection setup, Connect network cable, Configure lan connection – 4G Systems XSBox R4v User Manual
Page 25: Deactivate proxy server, Step 1 - connect network cable, Step 2 - configure lan connection, The dialogue lan connection properties appears, Lan connection set-up
XS
BoxR4v
25
LAN connection setup
The following steps are necessary to use a LAN connection between your PC/laptop and the XSBoxR4v:
1.
Connect network cable
2.
Configure LAN connection
3.
Deactivate proxy server
Step 1 - Connect network cable
■
Plug one of the network cable ends into the appropriate connector on your PC.
■
Plug the other end in to the jack marked LAN on the XSBoxR4v.
Step 2 - Configure LAN connection
START >> System control >> Network connections
1.
With the right-hand mouse button click on LAN connection and select the entry Properties in the context
menu.
2.
The dialogue LAN connection properties appears.
3.
Ensure the control box Internet protocol (TCP/IP) is activated on the register General.
4.
Highlight Internet protocol (TCP/IP) and click on the button Properties.
5.
The dialogue Internet protocol properties (TCP/IP) appears.
6.
Activate the option field get IP address automatically in the General register (Standard setting) and click on
the button OK.
7.
Click in the dialogue LAN connection properties and click on the button Close.
8.
You will then be requested to reboot the computer again if necessary.