4G Systems XSBox R4v - Manual (Page 21)

XS BoxR4v
21
Network setup
You can connect your PC/laptop to the XSBoxR4v either by using WLAN (wireless) or over a network cable.
In this section you will find the following instructions:
■ Setting-up WLAN connection
■ Setting-up a LAN connection
Please read the user documentation of the relevant manufacturer, should you use an operating system other than Micro-
soft Windows XP
TM (Service Pack 2) or Microsoft Internet Explorer 5.5 or higher.
WLAN connection setup
The PC/laptop you wish to connect to must support either the WLAN standard IEEE 802.11b
or IEEE 802.11g in order to connect to the XSBoxR4v over WLAN. Should your PC/laptop not support either of these
standards, then you can extend your computer with an external WLAN adapter (e.g. based on USB) or with an internal
WLAN plug-in card.
The following steps are necessary in order to use a WLAN connection between your PC/laptop and the XSBoxR4v:
1. Configure WLAN connection
2. Establish WLAN connection
3. Deactivate proxy server
4. Configure encryption for the XSBoxR4v
5. Configure encryption for your PC/laptop
Note: The following description for setting-up a WLAN connection is described here exemplarily for the WLAN-Adapter Intel® PRO/
Wireless 2200BG Network Connection. Should you use a different WLAN adapter or a WLAN card, then please read in addition
the user documentation from the relevant manufacturer.