Step 5 - configure encryption for your computer, Click on the register wireless networks, The dialogue xsboxr4v properties appears – 4G Systems XSBox R4v User Manual
Page 24: Carry out the following settings in this dialogue
User
Manual
24
Step 5 - Configure encryption for your computer
START >> System control >> Network connections
1.
With the right-hand mouse button click on wireless network connections and select the entry Properties in
the context menu.
2.
The dialogue Wireless network connection properties appears.
3.
Click on the register wireless networks.
4.
Highlight the entry XSBoxR4v in the area preferred networks and click on the button Properties.
5.
The dialogue XSBoxR4v properties appears.
6.
Carry out the following settings in this dialogue:
■
Select the entry WPA-PSK in the selection list Network authentication.
■
Select the entry AES in the selection list data encryption.
■
Enter the string in both the network key and confirm network key fields, as chosen in the previous
step for encryption of the XSBoxR4v.
7.
Click on the button OK. Click on the button close in the wireless network connection properties dialogue.
Encryption for the XSBoxR4v and your computer is now activated. The WLAN connection between the
devices will now be automatically established.
Note: A double click on the encrypted wireless network XSBoxR4v could request you to enter your individual key. Further connection
settings then take place automatically.