4G Systems XSBox R4v - Manual (Page 19)

XS BoxR4v
19
■ Key
You still need to choose a key once you have decided which encryption to use. When using WPA method, you
can register either a password (e.g.mustermann) or a hexadecimal string as the key.
Note: You should activate the WPA1+2 encryption in order to guarantee the highest possible protection. Furthermore we warn you of
the fact that an unencrypted connection can create high cost as anyone from outside can use your network.
Setup assistant - Step 4
Security level
The security level enables you to decide in favour of a certain pre-set security configuration. These configurations have
a bearing on which type of data traffic the device allows, e.g. WWW or FTP services, Email etc. Should you need a de-
tailed configuration of these security settings, then you can later extend the selected basic settings in the menu security
(see also “Security settings” on page 33).
Note: Should the PIN query on your SIM card be deactivated, please highlight the field ignore PIN/SIM error and do not enter anything
under "set-up assistant - step 1" on page 18.
Click then on the button finish.
Note: Once you have activated the encryption in the setup assistant - Step 3, then you must configure the encryption in your operating
system's control panel and continue from here (see also “Step 5 - Configure encryption for your computer” on page 24).
Access point setup (APN)
Administration interface >> Mobile >> Access point
Enter the access point which you have received from your mobile operator in the field named HSDPA/UMTS/EDGE/
GPRS access point (APN).
SMS service centre setup
Administration interface >> SMS Centre >> SMS Settings
Enter the telephone number of the service centre (SMS broadcast), which you have received from your mobile operator,
in the field named SMS Service Centre Number.