4G Systems XSBox R4v - Manual (Page 16)

User Manual
16
Connecting to power supply
Always use only the original XSBoxR4v power supply. Other power supplies
could damage or destroy the device. 4G Systems disclaims all liability if
other power supplies are used.
First place the small plug in the upper round port on the XSBoxR4v. Then
insert the large plug in to the power outlet. Initialisation could take 60 - 90
seconds.
Initial setup only with telephone
Plug the telephone cable into the jack marked Phone on the XSBoxR4v. Sta-
tus and error messages can be seen on the display of the XSBoxR4v.
Activating SIM card
1.Pick up the telephone receiver.
2.Please enter PIN is shown on the display. And you can hear a peep
tone in addition to the dial tone.
3.Press the # key, enter your PIN and confirm with the # key.
4.Should the PIN be correct, you will hear a confirmation tone and the time, date and network reception bars will
appear on the display. Should the PIN be incorrect, you will hear a warning tone and the following information will
appear on the display: Incorrect PIN. X more attempts.
Note: Should the SIM card PIN be entered wrongly three times, then the SIM card will be blocked for your security. The SIM card can
be unblocked by entering the PUK (Personal Unblocking Key). You will have received both the PIN and the PUK with your mo-
bile contract (see also “Unblock SIM card” on page 28).