4G Systems XSBox R4v - Manual (Page 18)

User Manual
18
in the fields marked Enter your PIN code and Repeat SIM card PIN code. Click on Continue.
Note: The SIM card automatically chooses the fastest available network connection. The PIN remains stored in the XSBoxR4v.
Should you exchange the SIM card, then you must enter the new PIN.
The setup assistant - Step 2
■ Mobile interface activated
Once you have activated the mobile interface: automatic, the device will in future automatically connect to the
internet/intranet when the PC/laptop is booted.
■ Disconnect on inactivity
Should you not use the online connection during the time preset, then the connection will be disconnected to save
cost.
Setup assistant - Step 3
It is very important that the encryption for your network is activated, as it is otherwise not protected against misuse. Un-
expected cost could arise for you as a result.
■ WLAN network name (SSID)
The SSID is the name with which the device identifies itself in the wireless network. You can then select this name
on your computer to be connected to the device.
■ SSID Broadcast
The device usually sends its SSID to offer itself to client computers. It is possible to switch this off to increase
security. In this case, the SSID known to you must then be entered manually on the client computer.
■ Encryption
It is imperative to encrypt WLAN data traffic, in order to avoid third parties connecting to your device via WLAN
or tapping into your data traffic. The safest methods are in this order: WPA 1+2, WPA 1, WEP 128 Bit, WEP 64
Bit. You should set-up the safest method supported by your computer. Incidentally the current Windows and Mac
OS versions support both WPA 1+2. For simple access the XSBoxR4v is delivered from the factory without en-
cryption.