4G Systems XSBox R4v - Manual (Page 28)

User Manual
28
Change password
Administration interface >> password
You should change the password regularly in order to avoid unauthorised access to your device.
1. 1. Enter your current password in the field marked old password.
2. 2. Enter your new password in the field marked new password, confirm new password and click OK.
Note: Please select your password carefully. The password should contain letters, numbers and special characters. It may be up to
50 characters long. Should you forget your password once it has been changed, then please reset the XSBoxR4v back to fac-
tory settings.
Change the SIM card PIN
Administration interface>> Mobile >> change PIN
1. Enter the current PIN in the field marked PIN Code.
2. Enter the new PIN in the fields marked New PIN Code and Confirm new PIN Code and click OK.
Note: You must re-enter your PIN after the following actions:
■ exchanging SIM card inserted
■ installing new firmware
■ Changing inserted SIM card PIN
■ resetting XSBoxR4v back to factory settings
Unblock SIM card
Administration interface >> Mobile >> entering PUK
1. 1. Enter your SIM card PUK in the fields marked PUK Code and Confirm PUK Code.
2. 2. Enter the new PIN in the fields marked New PIN Code and Confirm new PIN Code and click OK
Note: If you have entered your SIM card PIN incorrectly three times, then the SIM card will be blocked. You can remove the block by
entering the PUK (Personal Unblocking Key)