4G Systems XSBox R4v - Manual (Page 30)

User Manual
30
Manually setting time and date:
1. Enter the appropriate data in the fields marked Time and Date.
2. Click on the button Manual time/date.
Obtaining time and date automatically using NTP:
1. Enter the desired NTP server in the field marked Primary NTP Server and optionally in the field marked
Secondary NTP Server.
2. Click on the button change configuration.
3. Click on the button Time query.
Note: A connection to the internet will be established.
Rebooting XSBoxR4v
Administration interface >> Tools >> reboot
■ Click on the button reboot and after the security enquiry click OK.
Note: Rebooting the XSBoxR4v takes approximately 60 seconds. Should you recall the administration interface then you must re-
enter your user name and password.
Resetting factory settings
You can reset the XSBoxR4v back to its factory settings (so-called reset). In doing so all user defined settings are deleted
including the password for the administration interface. The reset function can be called up either using the administration
interface or by holding down the reset button directly on the device for at least 5 seconds.
Reset (Software)
Administration interface >> Tools >> Reset
1. Click on the button start reset.
2. Confirm the following security enquiry by clicking the button OK.
3. The settings made by you for the XSBoxR4v will be deleted. The device will then be automatically rebooted.