4G Systems XSBox R4v - Manual (Page 39)

XS BoxR4v
39
Static IP addresses
Administration interface >> DHCP Server >> Static addresses
1. Click on the button Add.
2. Enter the MAC address of the computer connected to the XSBoxR4v in the field marked MAC Address,
to which you would like to allocate a static IP address.
3. Enter the last numbers of the IP address which you would like to allocate to the computer in the field mar-
ked give IP address. The first part of the IP address which you allocate is pre-set by the XSBoxR4v's IP
address, as IP addresses must derive from the same address range.
4. Click on the button OK.
You can change the given static IP address. Highlight the appropriate entry in the list and click on the button
Edit. In order to delete a given IP address, highlight the relevant entry in the list and click on the button
Delete.
Configure dynamic DNS
Administration interface >> Tools >> DynDNS
You can configure the service DynDNS with the XSBoxR4v. You can select a domain name and DynDNS assigns this
name to the allocated dynamic HSDPA/UMTS/EDGE/GPRS IP address. It is thus possible that enquiries from the inter-
net are forwarded to your dynamic HSDPA/UMTS/EDGE/GPRS IP address. If an internet connection is established
using the device, then this IP address is automatically conveyed to DynDNS every time a HSDPA/UMTS/EDGE/GPRS
connection is established, thus also if XSBoxR4v is rebooted. How to configure the dynamic DNS:
1. Enter your data in the fields marked Domain Name, Login and Password.
2. Click on the button OK.
Note: You need a user account at www.dyndns.org in order to use the DynDNS service.