Canon XH A1 - Manual (Page 102)

102
Changing the Remote Sensor Mode
Two remote sensor modes and an off setting are available to prevent interference from other Canon
wireless controllers being used nearby.
To change the remote sensor mode of the camcorder
Change the [WIRELESS REMOTE] setting of the custom function file ( 85).
To change the remote sensor mode of the wireless controller
Press the ZOOM T button and keep it pressed for over 2 seconds to change the wireless
controller to mode 2. Press the ZOOM W button and keep it pressed for over 2 seconds
to change the wireless controller to mode 1.
If you have set the camcorder to mode 1, press the ZOOM W button for mode 1.
 The wireless controller returns to mode 1 when you replace the batteries. Change the mode if
necessary.
 Make sure that the camcorder and wireless controller are set to the same mode. Display the
camcorder’s mode by pressing any button on the wireless controller (except the REMOTE SET
button) and set the wireless controller’s mode to the same mode. Change the batteries if the
wireless controller still does not work.