Canon XH A1 - Manual (Page 96)

96
Using the SCART Adapter
If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
The supplied PC-A10 SCART Adapter is for output only. For analog line-in recording or analog-digital
conversion, use a commercially available SCART adapter with input capability.
Refer also to the instruction manual of the TV or VCR.
If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately.
Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and
close the menu.
We recommend powering the camcorder from a household power outlet.
3
AUDIO
(L
/MONO)
AUDIO
(R)
VIDEO
Signal flow
PC-A10 SCART
Adapter
STV-290N Stereo Cable
(supplied).
Open the terminal cover
white
red
yellow
To use the A/V terminal, set the video
output selection switch to A/V1. To use
the BNC teminal (VIDEO2), set it to V2.