Canon XH A1 - Manual (Page 85)

85
Cu
st
o
m
iz
at
io
n
E
[1kHz TONE] 1 kHz Reference Audio Signal
Selects the strength of the audio signal.
Setting Options: 00 – OFF, 01 – -12dB, 02 – -20dB.
[WIRELESS REMOTE] Wireless Remote Controller
Selects the remote sensor mode that the camcorder will accept. When set to [OFF ] the camcorder will
not accept commands from wireless controllers.
Setting Options: 00 –
1, 01 – 2, 02 – OFF .
[POWER SAVE] Power Save Mode
Activates the power save function so the camcorder automatically shuts off when powered by a battery and
left without operation for approximately 5 minutes.
Setting Options: 00 – ON, 01 – OFF.
[TALLY LAMP] Tally Lamp
Selects the operation of the tally lamp. Even if set to [OFF], the tally lamp will turn on when receiving a
command from the wireless controller.
Setting Options: 00 – ON, 01 – BLINK, 02 – OFF.
[LED] LED Indicators
Selects the operation of the LED indicators on the camcorder. When set to type 1 all LED indicators will be on,
except for that of the HDV/DV terminal. When set to type 2, all LED indicators (including that of the HDV/DV
terminal) will be on.
Setting Options: 00 – TYPE 1, 01 – TYPE 2, 02 – OFF.
[BEEP] Beep
Selects the volume for the camcorder’s operations and warning beeps.
Setting Options: 00 – OFF, 01 – LOW VOLUME, 02 – HIGH VOLUME.
[CHARACTER REC] Superimposing Character Recording
Selects whether to embed the on-screen character displays (date and time) as part of the video recording.
When set to [ON], the menu option [TV SCREEN] will not be available and [COMP.OUT] will automatically be
set to [1080i/576i] and you will not be able to select [576i].
Setting Options: 00 – OFF, 01 – ON.
14
15
16
17
18
19
20