Setting the white balance, Selecting the automatic white balance, Selecting one of the preset modes – Canon XH A1 User Manual

Page 58: Setting the color temperature

Advertising
background image

58

Setting the White Balance

The camcorder uses an electronic white balance process to calibrate the picture for accurate color
display under different lighting conditions.
In addition to the fully automated mode, white balance modes include an indoor mode, an outdoor mode,
a color temperature setting and two user-defined custom preset values.

Selecting the Automatic White Balance

Set the AWB switch to ON.

Selecting One of the Preset Modes

1. Set the

dial to a recording mode other than

.

2. Set the AWB switch to OFF and the WHITE BAL. switch to PRE.
3. Set the WHITE BAL. PRESET switch to or .

You can also fine-tune the preset /

settings. Press the WHITE BAL.

button so the preset icon

starts flashing and the neutral value ±0 appears next to it. Adjust the white balance with the dial to a
value between -9 and +9 and press the WHITE BAL.

button again.

Setting the Color Temperature

1. Set the

dial to a recording program other than

.

2. Set the AWB switch to OFF and the WHITE BAL. switch to PRE.
3. Set the WHITE BAL. PRESET switch to .

The color temperature currently set will be displayed.

Auto

Automated adjustment of white balance

(Outdoor)

Bright sunlight (5,600ºK)

(Indoor)

Incandescent light (3,200ºK)

(Color temperature) Setting depending on the hue of a specific lighting (2,800 - 12,000ºK in 100ºK

increments)

Custom Preset A, B

Custom preset (3,200 - 5,600ºK)

dial

WHITE BAL.

button

WHITE BAL. switch

White sh

eet

or paper

AWB switch

WHITE BAL. PRESET
switch

Advertising
This manual is related to the following products: