Canon BJC-8500 - Manual (Page 112)

Printer maintenance 107
Moving the printer
Follow the procedure below to prepare the printer for transport.
Before you move the printer, you must remove the ink tanks to avoid
shocks and vibrations which could cause them to leak.
1 Open the top cover and press the REPLACE button. The cartridge
holder moves to the left side.
2 Remove the ink tanks from the BJ Cartridges and place them in vinyl
bags.
3 Close the top cover. The cartridge holder moves back to the home posi-
tion after you close the top cover.
You have just removed the ink tanks so this will cause the printer to
sound a warning. Ignore this warning.
4 Press the POWER button to switch the printer off.
Always switch the printer off by pressing the POWER button. After
you switch the printer off, wait for the printer to cap the print heads
before you disconnect the power cord. This ensures that the print
heads will not dry out.
The BJ Cartridge holder locks automeatically so you do not have to
tape the cartridge holder to hold it in place.
5 Disconnect the power cord from the power outlet and the printer.
6 Disconnect the printer cable from the printer and computer.
7 Remove the paper from the sheet feeder and push down the paper rest.
Printer
maintenance