Canon BJC-8500 User Manual
Page 45
4
Load the stack in the paper cassette.
①
Position the stack with the print side down between the paper
guides and press down on the leading edge of the stack.
②
Make sure the corners of the leading edge of the stack are below
the tabs on the left and right.
③
Check the paper limit mark on the inside of the paper guides and
make sure the top of the stack is below this mark.
④
Move the horizontal paper guide to the side of the stack until it is
snug (not to tight).
⑤
Press down on the stack to confirm that it bounces smoothly up
and down. If the stack does not move smoothly, loosen the hori-
zontal paper guide on the side.
⑥
Check the tabs again to make sure that the corners of the stack are
still below the tabs.
40
Canon BJC-8500 User’s Manual
Vertical paper guide
Horizontal paper guide
④
③
⑤
⑥
②
①