Canon BJC-8500 - Manual (Page 77)

72 Canon BJC-8500 User’s Manual
2 To avoid paper jams, make sure the top of the stack is below the paper
limit mark on the right side of the sheet feeder.
3 Make sure the paper guide is snug (not too tight) against the left side
of the stack.
4 Make sure the paper output receiver paper guide is set to the correct
mark for the paper size you are using.
5 Check the printer driver settings for this media (Print Mode, Paper
Size, etc.). If you are using Windows, refer to the Windows Print Guide
for details. If you are using a Macintosh computer, refer to the
Macintosh Print Guide for details.
To handle printed Transparencies
1 Start printing with your software application.
2 Remove each printed sheet from the paper output tray as it is ejected
from the printer. Do not allow printed Transparencies to stack up on
the paper output tray.
3 Before you handle the printed sheets, allow the ink to dry thoroughly.
Drying requires about 15 minutes.
4 After the Transparencies have dried, cover the printed side with a sheet
of plain paper to prevent the printed sheets from sticking together.
If you intend to store the printed Transparencies in a clear plastic fold-
er, insert one sheet of plain paper between the plastic cover and the
printed surface of the transparency to prevent the cover and printed
surface from sticking together.