Canon BJC-8500 - Manual (Page 43)

38 Canon BJC-8500 User’s Manual
■ Thick paper (max. 0.25 mm) and Fabric Sheet FS-101 must be fed manual-
ly and printed one sheet at a time.
■ Only Plain Paper, Bubble Jet Paper, and High Resolution Paper can be
loaded in the paper cassette.
Media Type Load Print Side Limit (sheets)
Plain Paper (64~90 gsm) Either side down. 250
Bubble Jet Paper LC-301 Either side down. 250
High Resolution Paper HR-101 Whiter side down. 200
To load and install the paper cassette, you will need the universal paper cas-
sette, the paper output tray which is attached to the top of the cassette, and
some paper.
1 Adjust the length of the paper cassette for the length of the paper you
are going to load.
You do not have to adjust the length of the cassette unless you are
going to load a paper size longer than standard A4 or Letter size
paper.
To make the paper cassette longer, press in and hold the button on the
back of the cassette, and press out on both ends of the paper cassette
until it locks. To make the paper cassette shorter, press in and hold the
release button and press in on both ends of the paper cassette until it
locks.