Canon BJC-8500 - Manual (Page 51)

5 Check the paper output receiver and paper output extension.
The paper output receiver paper guide must be adjusted to the paper
size.
If you are going to print on paper larger than A4 or Letter size, pull out
the paper output tray extension.
The extension has two positions for large paper. You can simply pull
out the paper output tray extension (A), or you can also pull out the
entire paper output tray (paper cassette lid) with the paper output tray
extension extended for very large sizes (B).
To attain maximum paper supply capacity
Before you start a long print job, make sure the paper size and orienta-
tion of the paper in the sheet feeder matches the size and orientation of
the paper loaded in the paper cassette. Then use the printer driver to
set the paper source for automatic selection.
The sheet feeder can hold up to 100 sheets of standard (64 gsm) Plain
Paper. After it runs out of paper, paper feed will automatically contin-
ue from the paper cassette which can hold 250 sheets of standard (64
gsm) Plain Paper.
If the optional cassette is installed in the printer, after the standard cas-
sette runs out of paper, paper feed will automatically continue from the
optional paper cassette which can also hold 250 sheets of standard (64
gsm) Plain Paper.
During a long print job, do not allow the printed sheets to stack higher
than 15 mm (about 1/2 inch), approximately 50 sheets of Plain Paper
or 40 sheets of High Resolution Paper HR-101.
46 Canon BJC-8500 User’s Manual
Paper cassette
Paper output receiver
Paper output tray (cassette lid)
Paper cassette
Paper output receiver
Paper output tray extension
(A)
(B)