Canon BJC-8500 - Manual (Page 74)

To load Glossy Photo Card FM-101 in the sheet feeder
1 Lower the paper rest.
2 Raise and lock the
envelope guide on the
right side. On the left
side, do not raise the
envelope guide.
Make sure that it is
down.
3 Hold the stack with the
glossy side up and the wider
side pointing down.
4 Align the stack with the right
edge of the sheet feeder, and
slide the stack in until it
stops.
5 Make sure the top of the
stack does not exceed the
paper limit mark on the right
side of the sheet feeder.
6 Slide the paper guide on the
sheet feeder until it reaches
the left edge of the stack.
Printing on paper and other media 69
Printing on paper
and other media
Envelope
guide
Do not exceed the line!