Kenwood KR-V990D - Manual (Page 14)

KR-V390D (En]
This receiver incorporates an on screen display (OSD) feature to provide information in large easy to read characters and to
simplify operation. OSD lets you carry out three types of operations using the remote control's GUI (graphical user interface)
mode. But first, lets see what kind of screen OSD provides.
Turn on the components you want to use.
• Set the MAIN POWER key to the ON position.
• Set the REMOTE POWER key to the ON
position.
•Turn on the connected monitor TV.
Activate the GUI mode.
%
This is the first display that appears when you activate the GUI mode.
MAIN MENU
CD
PHONO
TUNER
TAPE1
iOVIDEOI
1VIDE02
JVIDE03
ITVDCABLE
JLD
□TAPE2M0NIT0R
fe-
O Switch input sources and operate other components.
The current input is displayed in blue. When you select
another source, the input switches and the operation screen
for that component is displayed (except for VIDEO 3 and
PHONO).
- VIDEO input display
Red: Represents the current video input.
Blue: Shows that the video input is locked (VISUAL FIX).
'VISUAL FIX"-^
r Pointer ^1^
Move this hand (pointer) to conduct on-screen operatior^^
I u? I
-----------
O
Create an ideal AVenvironment.
O Select surround modes on-screen.
Here's what you can do in GUI mode
O Create an ideal AV environment (Set Up).
You can set up your AV system for efficient operation of all the audio and video equipment connected to this receiver. Set
according to your equipment. (SYSTEM SET UP)
This mode also lets you complete the required surround setup. Once surround setup is complete, you may not need to adjust
it again unless you change (or add) speakers. (SURROUND SET UP)
It may seem tedious but after you complete these set up operations, you will have a fully integrated AV system.
O Select surround modes on-screen.
The receiver lets you choose from various home theater operations while looking at the screen of your monitor TV. So you
can stay seated for simple operations.
0 Switch input source and operate other components.
The GUI mode also lets use the monitor TV screen for basic operations of components connected to the receiver with
SYSTEM CONTROL cords. With the [SL16] mode, the current status of the source component is displayed in red.
You can also conduct basic operations of video components by entering the remote control set up code. In this case, the
current status of the video component is not displayed.
Since the icons shown on the monitor TV are similar to the symbols on the operation keys of each source component, also
check the operating instructions supplied with the source components during operation.
5