Kenwood KR-V990D - Manual (Page 17)

Use the SET UP menu to create an ideal AV operating
environment by matching the system control functions to
your components. The SET UP menu arranges for proper
control of other KENWOOD components and systems, as
well as video equipment from other manufacturers.
I^eparations •Turn on your monitor TV.
Sj^msetug^
CZ) CZI CZI IZZ)
' C±)C±1 £±D
Keys or controls used in this operation.
Choose the SYSTEM SET UP menu.
\ Set the SYSTEM CONTROL.
Set the KENWOOD system control. For details regarding SYSTEM CONTROL, i i "Connecting the system control",
SYSTEM CONTROL
...T
.. J-
............ UP............
OR REMOTE DSYNCHRO
■ . . . ............ ................................ ................................ ................................ ................................ ................................
¿WW-lfup’r
TO n I iSl
I0i
O Choose a SYSTEM CONTROL mode.
This switches the KENWOOD SYSTEM CONTROL mode. For details regarding
SYSTEM CONTROL, see "Connecting the system control".
• If you switched the SYSTEM CONTROL mode in "System connections", check to make sure
the mode is correct and go to the next step.
• If the POWER is not turned on for 3 days, the SYSTEM CONTROL mode will automatically
return to [SL16i. To set the receiver to [SL16] permanently, consult with your dealer.
O Choose how to operate your LD player.
When you use a SYSTEM CONTROL cord to connect a KENWOOD LD player
compatible with the [SL16] system control mode, choose the SYSTEM CONTROL
and iR remote operations.
O Choose either TAPE 1 orMD ([SL16] only}.
This determines which component can be operated by the SYSTEM CONTROL.
The input you select can then be chosen with the input selector.
•When the SYSTEM CONTROL is set to [SL16], and a [SL16] mode compatible KENWOOD MD
recorder is connected to the TAPE1/MD jacks, select "MD".
O Continue to next screen.
continued on next page