Recording audio, Recording a music source, Dubbing tapes (tape 1 -► tape 2 – Kenwood KR-V990D User Manual
Page 25: Wpe2 (monitor) function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iMtIiJjlilun
Keys or controls used in this operation.
Recording audio
Recording a music source
•You can also select TAPE S[MONITOR] using on-screen operation
(MAIN MENU).
•When copying with a double cassette deck, refer to the operating
instructions supplied with the deck.
Dubbing tapes (TAPE 1 -► TAPE 2}
O Set the INPUT SELECTOR to TAPE 1.
® Start playback from TAPE 1,then start recording on TAPE 2.
WPE2 (MONITOR) function
You can connect either a cassette deck or a graphic equalizer to the receiver's TAPE 2 terminals. If you connect a graphic equalizer, the
TAPE 2[M0NIT0R) key should be turned ON. If you connect a 3-head cassette deck, you can compare the source sound to the sound
being recorded while recording. Press the TAPE S(MONITOR) key to switch between the recorded sound to the source sound. For
further details, refer to the operating instructions supplied with the component you connected.