10<3 multi-range functions, Toshiba – Toshiba LF494 User Manual
Page 114
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F , 8 A Û 7 7 4
10<3 Multi-range Functions
Multi-rftngc funclions can be set under the configuration item “RANGE TYPti.'" Refer to
8
.
2
,
6
, “Span (Range)/’ Four types of multi-range configurations are avaiJahIc as shown
below:
(1) Automatic selection of unJdirectional flow multi-range
(2) Automa tic se lect ion of bi d ireci ional fio ws multi ■ range
(3) Remote selection of unidirectional flow multi-range with an external signal
(4) Remote selection of bidirectional flows multi-range with ал external signal
Proceed as follows to use the multi-range functions.
Range setting
Set as follows referring to 8.2.5, “Span (Range)/’
1.
Select ^^RANGE TYPE."
2
. Set the span for ranges J lo 4,
3.
Sei the hysteresis value.
DO/DI function setting
Set DOl and/or D02 (option) to use them as range outputs. Refer to 8.2.9, “Digital
I/O"
To select ranges with a rernote signal, use DT (option) as a remote signai. Refer to
8.2.9, “Digital FO"
-
1 1 3
-