Specifications, Toshiba – Toshiba LF494 User Manual
Page 144
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 . 4
I I .1
15. Specifications
The flowmeter specification:s and Ihc type specification code used when ordering the
flowmeter are described in this chapter.
15*1 Flowmeter 5 pecifi cations
■ Overall Specifications
Measurement range m terms of flow velocity:
0-(J3 m/s to 0-10 in's (0-0.1 nvs to 0-0.3 nvs range is available optionally)
System accuracy:
See the following table.
Table 15.1 System accuracy
Flow rate as a
percentage
of
range
Accuracy
O.l-LO m/s OJ -
1*0
m/s
1
*
0-10
m/s
0
to
20
%
±0.1% FS
20
to
100
%
±0.5% of rate
0 to 50%
iO.25% of FS
50 to 100%
±0.5% of rate
Note: The accuracy above is measured under standard operating conditions at
Toshiba’s calibration facility.
Fluid conductivity:
5 ,«S/cm minimum
Fluid tempera! ure:
-10 to -i-120 " C
Ambient temperature: -10 to H-fiO
° C
Dimensions and Mass; See Chapter 16, “Outline Dimensions,’'
-
1 43 -