Toshiba – Toshiba LF494 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 4
*In case of forgetting password (reading out password)
Proceed as folJows tcj unly readout password in case of forgetting password. In the other
cascj do not do it.
<Notiee>
The meihod of PASSWORD MAJMAGEMENT including its lifting or reading out requires
to be controlled by system's own risk.
■ Readout the password;
I'he following example shows how' to readout the password .
Key operation
Display example
Description
Befor lurning
01
] power, орел the housing cover for
LCD display, and short-drcuil between TT-RST and
TT-G that is back of the operation panel with the
dip-type cable (refer to f igure
8
.
1
)
After that, turning on power, LCD back-light bright,
in the operation panel
10.00
m/s
100
.
0
%
Open the dip-type cable.
LCD displays "SIGNAL CHECKS and after that
displays measured daia,(measureTncni mode)
SET
□
PASSWORD I N P U T
m
Pressing [SET], password input mode and the cursor
appears.
^ ►
□ □
PASSWORD I N P U T
m
m
m
Change the value by pressing [
a
J.and [ ► ].
SET
PASSWORD INPUT
123
Pressing [SET], the cursor disappears and the changed
display flickers. Pre.ss [SET] again to input the value.
SET
□
Al: EX. CLRR.
Whether input password agrees or dose not agree , the
items selection sequence, “Al: EX, CURR’' appears.
□
A4; PASSWORD
Select A4: PASSWORD from among the configuration
items using [ ► j and [
a
] keys ,
SKI’
□
A4: PASSWORD
123
Press [SET] again to display the current
password(l23).
-
9 3
-