Pattern run – Toshiba Tosvert VF-A5 User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U r
.
P (Pattern Run Parameters)
P S E L P E P
Pattern run @
5 L n
set to
4
Ptn
p t n = 0
Time [S]
Run signai
_r
5 L n
set to
5
Time [S]
* Allocate the pattern run step trigger signal to an
input terminal with the input terminal selection
Cl
5 b
l b *
* The pattern run group may need to be selected from the terminal block.
If panel command mode is active, group #1 will always be selected.
(To use a group other than group #1, allocate the pattern run selection functions #1, #2, #3 or #4 with the
input terminal selections O r .
5 b f t
*
I
(*: 0 ~ /0 ). snd operate from the terminal block.)
* If all pattern run input terminals are OFF or if the pattern run is completed, normal operation will be performed.
Pattern run input #1
Pattern run input #2
Pattern run input #3
Pattern run input #4
№W
0
Executing pattern group #1
Executing pattern group #2
Executing pattern group #3
Executing pattern group #4
If several contacts are simultaneously activated, the smallest pattern group No. will be executed first, and the
following groups wiil be automaticaliy executed in sequence.
It may take approx. 0.06 sec. to search for a pattern.
- 83 -