Futaba GY701 User Manual
Page 20
M
ECHANICS
P
REPARATIONS
ｎWARNING
ｊ Newer high end servos and other radio
equipment are capable of placing large de-
mands on the power systems in use today.
When using a regulator you must ensure that
the regulator is capable of delivering the cur-
rent demands of the equipment you have se-
lected. In addition to this make sure the wiring
and switch you have selected are capable of
handling high current draws.
ｊ %VEN
s
DRIVE
s
pulleys, belt, bearings and shafts are in proper
working condition. If any of these items are
damaged or worn they must be replaced.
s
and tail rotor grips must operate without friction
to obtain the best performance from the GY701.
If any binding is present it must be fixed before
the helicopter can be flown. Binding in the tail ro-
tor control linkage will decrease the performance
of the GY701 gyro and this may also shorten the
servo lifespan. Please take the time now to ensure
the tail rotor system on your helicopter is working
correctly, without friction or binding.
Gyro
20