Futaba GY701 - Manual (Page 72)

G
YRO
E
XPERT
S
ETTING
72
key, the mode is changed.
(22) Neutral compensation
default: ON (F3C), Off (3D)
This function works to recall the neutral point of
the rudder servo for improving tail stop motion.
To use this function effective, hover the helicopter
for about one second, and memorize the neutral
point. If using a 3D helicopter, the tail movement
is often very quick, this function may not work as
well. Check the function to see if it works correct-
ly. Pushing data+ or – key, the mode is changed
(23) Yaw smoother
default: ON (F3C), Off (3D)
Selects the rudder control feeling. When On, rud-
der control becomes more exact. When Off, rud-
der control response increases. Select the rudder
control feeling to your taste.
(24) Stop boosting
default: Off
range: Off
200%
This function works for boosting the gyro gain to
improve tail stop motion. Pushing the data+ or –
key, the value is changed.