Futaba GY701 - Manual (Page 75)

G
OVERNOR
E
XPERT
S
ETTING
75
(3) Revolution display mode
default: Rotor
This selects the revolution display mode for either
the main rotor or engine revolution. Pushing data+
or – key, the mode is changed.
(4) Operation response
default: Middle
This selects the governor operation response.
Select the best match for your engine type. Push-
ing data+ or – key, the mode is changed. Recom-
mended selection are, Middle-> glow engine,
Moderate-> gasoline engine, Quick ->Brushless
motor-.
(5) Governor gain
default: Moderate=30%,Middle=40%,Quick=60%
ranges: 10~100%
This sets the governor working gain. When the
operation response is changed, the governor gain
is automatically changed as default. The best gain
is the amount right before the revolution wagging
takes place. Pushing data+ or – key, the value is
changed.