Futaba GY701 - Manual (Page 67)

G
YRO
E
XPERT
S
ETTING
67
(7) Control delay Out
default: F3C=10, 3D=12
ranges: 0
20
This sets the rudder control delay of moving to
neutral from right or left side. It can adjusts left
and right individually. Adding to the value, the
control feeling will be mild. Pushing data+ or –
key, the value is changed.
(8) Stop delay
default: 120%
ranges: 100%
400%
This sets the rudder delay of the tail stop mo-
tion. It improves the tail stop bounce to adjust
the value. Pushing the data+ or – key, the value is
changed.
(9) Gyro working mode
default: CMT
This selects the gyro working mode either CMT,
Normal or AVCS. The CMT mode can select the
AVCS or Normal mode through gyro gain chan-
nel. The Normal mode is always Normal mode,
AVCS is always AVCS mode. Pushing the data+
or – key, the mode is changed.