Futaba GY701 - Manual (Page 26)

H
OME
S
CREEN
26
when the engine stop. The revolution mode can
be selected either during main rotor revolution or
engine revolution. The rpm character starts blink-
ing slowly when the governor starts operating
and blinking fast when the revolution reaches +/-
2% of the setting revolution. The rpm character
changes to inverse character as the revolution
increases to within +/- 1% of the setting when the
revolution is locked.
For the governor only mode, the revolution is dis-
played on the top of the display line during engine
run.
Sub_Home screen
At the home screen display, the display below
the line is scrolled to Battery voltage→Max.
revolution→Engine runtime→OLED display
mode→LED display mode→Operation mode by
pushing the mode + or - key.
1. Max. revolution
Governor
This memorizes the maximum engine revolution dur-
ing operation. The display is changed to Max. revolu-
tion by pushing the mode + key. The revolution data
is stored in the memory. The data is reset by pushing