Futaba GY701 User Manual
Page 27
H
OME
S
CREEN
27
the data + or – key for more than one second.
2. Engine runtime
Governor
This displays the engine runtime integration. The dis-
play is changed to runtime mode by pushing mode +
key 2 times from home screen. The display unit will
show seconds until 100 hours is reached xxHxxMxx,
over 100 hours, minutes as xxxxHxxM. The display
is reset by pushing data + or – key for more than 1
second.
3. OLED display mode [default: Saver]
This selects the OLED display mode. The Saver mode
reduces the brightness and saves the power consump-
tion after no editing has been done for 60 seconds.
The brightness is returned by pushing any key. The
Light mode always lights to the maximum brightness.
4. LED display mode [default: ON]
It selects the display mode of the LED on the gyro
sensor. The LED is lit during ON setting, turned off
by Off setting for power saving. The mode can be
changed by pushing the data + or – key.