6) throttle data mode, 7) revolution change up delay – Futaba GY701 User Manual
Page 76
G
OVERNOR
E
XPERT
S
ETTING
76
(6) Throttle data mode
default: Optimize
This selects the throttle input operation. Pushing
data+ or – key, the mode is changed
Optimize:
GY701 sets the throttle input signal to optimum.
No need to consider the throttle curve setting on the
transmitter.
Fixed:
The fixed throttle input is utilized related to the revo-
lution. It is recommended for electric motors.
Tx.Curve:
GY701 uses the exact throttle input from the trans-
mitter. The throttle curve setting on the transmitter
is required. When the Rev.Lmt mode is selected, this
mode should be selected.
(7) Revolution change up delay
default:
8
range:
2
20
This sets the delay of the revolution from low
to high. Pushing data+ or – key, the value is
changed.
(8) Revolution down delay
default:
10
range:
2
20