GTCO AccuTab VI - Users Guide - Manual (Page 27)

AccuTab VI 27
Cleaning the Tablet
To clean the tablet’s surface, use a soft, non-abrasive cloth. Hardened dirt can be removed
with a slightly dampened cloth. Do not clean pencil lines with a soft cleanser or pencil
eraser. This could create an undesirable shiny spot on the tablet’s surface that cannot be
removed.
Cleaning the Cursor
To clean the cursor body, use a mild cleanser. Do not spray the cleanser directly on the
cursor – instead, dampen a soft cloth with a mixture of water and the cleanser. Clean the
cursor reticles with alcohol.
Troubleshooting Guide
GTCO CalComp by Turning Technologies wants your experience with Super L VI to be a
successful one. If you ever encounter a problem, please follow the steps below:
1. Install properly first.
This troubleshooting guide assumes you have already correctly installed AccuTab VI
according to the detailed instructions in the Installing Your AccuTab VI section. If you
have not followed the step-by-step instructions in that section, do so now.
2. Read the topics below to check for a solution to your problem. Work through
the troubleshooting flowcharts on the following pages in this troubleshooting