GTCO Summagrid IV - Users Guide Part 2 - Manual (Page 7)

Summagrid IV 7
1.5 Report Modes: Overview
1.5.1 Description
Report modes are used to control the manner and rate by which reports are sent to
the host. Different applications have different requirements for accepting data
(reports) from the tablet. There are four different report modes: Prompt, Point,
Stream and Switch Stream.
1.5.2 When to Use
View the individual command descriptions for more detailed information on when
to use.
1.5.3 Report Mode Command Syntax
1.6 Report Modes: Prompt
1.6.1 Description
Prompt mode allows the application to send a prompt to the tablet whenever it is
ready to accept a new coordinate. This reduces the amount of unwanted data and
allows the application to ignore the tablet when it wants to.
1.6.2 When to Use
Prompt mode can be used to communicate with the majority of applications.