HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 168)

CONTINUED
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset bars.
Use the TUNE bar to tune
the radio to a desired frequency.
Push the
on the TUNE bar to
tune to a higher frequency, or push
the
to tune to a lower frequency.
Hold the bar down until the display
reaches the desired frequency.
The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar (
or ) until
you hear a beep, then release it.
Depending on which side of the
SEEK bar you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Audio System
Comf ort and Convenience Features
TUNE
SEEK SCAN
165
Main Menu Table of Content