HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 371)

Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully, it may be hot from
driving.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
12. 13. On LX and LX-V6 models
Taking Care of the Unexpected
Changing a Flat Tire
368
WHEEL COVER
WHEEL NUTS HUB
Main Menu Table of Content