Cooling system – HONDA 2003 Accord Coupe - Owner's Manual User Manual

Page 303

Advertising
background image

Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.

The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.

Pour the coolant slowly and carefully
so you do not spill. Clean up any
spills immediately. Spilled coolant
could damage components in the
engine compartment.

Put the radiator cap back on.
Tighten it fully.

Remove the radiator cap by
pushing down and turning
counterclockwise.

Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.

Make sure the engine and radiator
are cool.

4.

5.

6.

1.

2.

3.

Cooling System

Maintenance

300

RESERVE TANK

4-cylinder models

6-cylinder models

4-cylinder models

RADIATOR CAP

RADIATOR CAP

Main Menu

Table of Content

Advertising