HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 370)

CONTINUED
Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground. Locate the jacking point nearest
the tire you need to change. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch. Remove the wheel nuts, then
remove the flat tire. Temporarily
place the flat tire on the ground
with the outside surface of the
wheel facing up. You could scratch
the wheel if you put it face down. 9. 10. 11.
Changing a Flat Tire
Taking Care of the Unexpected 367
JACKING POINT WHEEL WRENCH EXTENSION
Main Menu Table of Content