Cooling system – HONDA 2003 Accord Coupe - Owner's Manual User Manual
Page 307
Advertising
Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
Tighten the drain bolt at the rear
of the engine cylinder block
securely.
Tightening torque:
7.
9.
8.
6-cylinder models only
Cooling System
Maintenance
304
4-cylinder models
FILLER NECK
Fill up to here
FILLER NECK
Fill up to here
6-cylinder models
7 lbf·ft (9.8 N·m , 1.0 kgf·m)
Main Menu
Table of Content
Advertising