HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 169)

You can store the
frequencies of your favorite radio
stations in the three preset bars.
Each bar will store two frequencies
on the AM band, and four
frequencies on the FM band.
To store a frequency:
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
bar.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Pick the preset number (1 6)
you want for that station. Press
the left or right side of the bar and
hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
on FM.
Once a station’s frequency is stored,
simply press and release the left or
right side of the proper preset bar to
tune to it.
The preset frequencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio fuse is
removed.
If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
To activate Auto Select, press the
A. SEL button. A. SEL will flash in
the display, and the system will go
into scan mode for several seconds.
It automatically scans both bands,
looking for stations with strong
signals. It stores the frequencies of
six AM stations and twelve FM
stations in the preset bars (1
6).
You can then use the preset bars to
select those stations.
1.
2.
3.
4.
Audio System
Comf ort and Convenience Features
Preset AUTO SELECT
166
Main Menu Table of Content