HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 348)

Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Reinstall the air intake duct
securely.
Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
If you need to change the low
beam headlight bulb on the driver’s
side, remove the air intake duct.
You can reach the air intake duct
from the back side of the inner
fender.
6.
5.
7.
8.
9.
10.
11.
4.
On EX-V6 model with manual
transmission
On EX-V6 model with manual
transmission
Maintenance
Lights
345
AIR INTAKE DUCT
EX-V6 with M/T
Main Menu Table of Content