HONDA 2003 Accord Coupe - Owner's Manual - Manual (Page 202)

Select the CD changer by pressing
the CD/AUX button. You will see
‘‘CD’’ in the upper display. The
system will begin playing the last
selected disc in the CD changer. You
will see the disc and track numbers
displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc 1. Each time you press and release the
top
of the SKIP bar, the system
skips forward to the beginning of the
next track. Press and release the
bottom
to skip backward to the
beginning of the current track. Press
it again to skip to the beginning of
the previous track.
To move rapidly within a track, press
and hold the top or bottom of the
SKIP bar. You will hear a beep and
the system will continue to move
through the track. Press
to
move forward, or to move
backward. Release the bar when the
system reaches the point you want.
To select a different disc, touch the
appropriate disc icon (1
6) or
press the upper side ( ) or the
lower side ( ) of the DISC bar next
to the audio display. If you select an
empty position in the CD changer,
the system will go into the loading
sequence (see page
).
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
When you touch the TRACK SCAN
icon on the audio display or press the
SCAN button next to the display, the
first track of the current CD plays
for about 10 seconds. You will see
TRACK SCAN in the display (or
SCAN in the upper display). To hear
the rest of the track, touch TRACK
SCAN or press SCAN button again,
within 10 seconds. If you don’t, the
system advances to the next track,
plays about 10 seconds of it, and
continues through the rest of the
tracks the same way.
197
CONTINUED
Operation
Audio System
Comf ort and Convenience Features
Track Scan
199
Main Menu Table of Content