IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 124)

115
Here you can realize network time synchronization. Please enable current function and then input
server IP, port number, time zone and time.
Figure 6-35 NTP
Please refer to the following sheet for detailed information.
Parameter Function
Enable Enable NTP function or not.
Server IP Server IP address
Port Server port. System supports TCP only and default port value
is 123.
Time Zone Device current time zone.
Update Interval Time update interval value.
Alarm Centre
Alarm centre interface is shown as below. See Figure 6-36.
Please input alarm centre server IP, port number. Once there is an alarm occurred, system can
notify the alarm centre as you specified here.