IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 135)

126
Please refer to the following sheet for detailed information.
Parameter Function
Alarm output The alarm output channel may vary. The interface here is for
reference only.
Please click the corresponding number and then click the trigger
button.
Trigger Enable/disable alarm output.
Please note once you activate an alarm manually, you need to
click the output channel number again and then click trigger button
to disable it. Otherwise the alarm can not be cancelled.
Refresh
Search alarm output status.
6.4.3.4 Record
Record control interface is shown as in Figure 6-49.
The bit stream type includes main stream and extra stream.
Figure 6-49 Record
Please refer to the following sheet for detailed information.
Parameter Function
Schedule
System enables auto record function as you set in schedule setup
(chapter 7.3.2.2).
Manual Enable corresponding channel to record no matter what period
applied in the record setup.
Stop Stop current channel record no matter what period applied in the
record setup.
6.4.3.5 Account
Here you can add, remove user or modify password. See Figure 6-50.