IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 24)

15
Port Name Connection Function
1-8 Alarm input
port 1-8.
z There are two groups. The first group is
from port 1 to port 4; the second group is
from port 5 to port 8. They are to receive
the signal from the external alarm
source. There are two types; NO (normal
open)/NC (normal close).
z When your alarm input device is using
external power, please make sure the
device and the NVR have the same
ground.
Alarm input
port ground
end Alarm input ground end.
NO1～NO3
C1～C3
Alarm output
port
1～3
z 3 groups of alarm output ports. (Group
1：port NO1～C1,Group 2:port NO2～
C2,Group 3:port NO3 ～ C3 ） ).Output
alarm signal to the alarm device. Please
make sure there is power to the external
alarm device.
z NO：Normal open alarm output port.
z C：Alarm output public end.
A RS485_A port. It is the cable A. You can
connect to the control devices such as speed
dome PTZ.
B
RS485
(RS-485)
communication
port
I/O port
RS485_B.It is the cable B. You can connect
to the control devices such as speed dome
PTZ.
Power input
port / Input 12V DC.
Power button / / Power on/off button.
PoE PORTS 8 PoE ports / Built-in Switch supports PoE function.
The 8 PoE ports series product supports total
48V 120W.
Power input
port / Switch power port. Input DC 48V.
VIDEO OUT
Video input
port / CVBS output
MIC IN Audio input
port / Bidirectional talk input port. It is to receive the
analog audio signal output from the devices
such as mike phone, pickup.