IC Realtime 4/8/16/32 Channel 1U PoE Network Video Recorder - Manual (Page 130)

121
Figure 6-42 Detect
Please refer to the following sheet for detailed information.
Parameter Function
Event type Motion detect, video loss and video masking
Channel
Select a channel from the dropdown list to set motion detect, video loss and vid
masking function.
Sensitivity System supports 6 levels. The sixth level has the highest sensitivity.
Enable button Check the box to enable this function.
Region
There are PAL22X18/NTSC22X15 small zones.
Blue area is the detection zone. Right click to view in full screen, click OK
before exit to save the setup.
Period Here you can set for business day and non-business day.
Anti-dither Range: 0～600
Alarm output: s. when an alarm occurred, system enables peripheral alarm device
Record channel
Select the recording channel (Multiple choices). This channel will be activated
to record when an alarm occurs.
Send email
System can send out email to alert you when an alarm occurs.
Tour Here you can enable tour function when an alarm occurs.
PTZ activation
Here you can set PTZ movement when an alarm occurs. Such as go to
preset, tour &pattern when there is an alarm.
Capture You need to input capture channel number so that system can backup
snapshot file when an alarm occurs.
6.4.2.2 PTZ
PTZ interface is shown as in Figure 6-43